Mercurial > hg > octave-lyh > gnulib-hg
changeset 6943:64f144ace584
Sync from upstream.
author | Paul Eggert <eggert@cs.ucla.edu> |
---|---|
date | Sun, 09 Jul 2006 16:31:39 +0000 |
parents | 9e87d8474fb1 |
children | 823fc50dfbd9 |
files | ChangeLog build-aux/depcomp build-aux/install-sh doc/ChangeLog doc/maintain.texi doc/make-stds.texi |
diffstat | 6 files changed, 263 insertions(+), 80 deletions(-) [+] |
line wrap: on
line diff
--- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,7 @@ +2006-07-09 Paul Eggert <eggert@cs.ucla.edu> + + * build-aux/depcomp, build-aux/install-sh: Sync from Automake. + 2006-07-08 Paul Eggert <eggert@cs.ucla.edu> * gnulib-tool (func_get_filelist): Don't echo m4/onceonly_2_57.m4,
--- a/build-aux/depcomp +++ b/build-aux/depcomp @@ -1,7 +1,7 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2006-05-10.23 +scriptversion=2006-07-09.11 # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software # Foundation, Inc. @@ -335,7 +335,7 @@ # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and + # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
--- a/build-aux/install-sh +++ b/build-aux/install-sh @@ -39,8 +39,7 @@ # when there is no Makefile. # # This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. +# from scratch. nl=' ' @@ -50,6 +49,11 @@ # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" +if test -z "$doit"; then + doit_exec=exec +else + doit_exec=$doit +fi # Put in absolute file names if you don't have them in your path; # or use environment vars. @@ -66,17 +70,9 @@ posix_glob= posix_mkdir= -# Symbolic mode for testing mkdir with directories. -# It is the same as 755, but also tests that "u+" works. -test_mode=u=rwx,g=rx,o=rx,u+wx - # Desired mode of installed file. mode=0755 -# Desired mode of newly created intermediate directories. -# It is empty if not known yet. -intermediate_mode= - chmodcmd=$chmodprog chowncmd= chgrpcmd= @@ -133,6 +129,12 @@ -m) mode=$2 shift shift + case $mode in + *' '* | *' '* | *' +'* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac continue;; -o) chowncmd="$chownprog $2" @@ -191,7 +193,32 @@ exit 0 fi -test -n "$dir_arg" || trap '(exit $?); exit' 1 2 13 15 +if test -z "$dir_arg"; then + trap '(exit $?); exit' 1 2 13 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi for src do @@ -274,46 +301,67 @@ if test $dstdir_status != 0; then case $posix_mkdir in '') - posix_mkdir=false - if $mkdirprog -m $test_mode -p -- / >/dev/null 2>&1; then - posix_mkdir=true + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./-m "$test_mode" ./-p ./-- 2>/dev/null - fi ;; + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- / "$tmpdir/d") >/dev/null 2>&1 + then + # Check for bugs in HP-UX 11.23 and IRIX 6.5 mkdir. + case `ls -ld "$tmpdir"` in + d????-??-* ) posix_mkdir=:;; + esac + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; esac if - $posix_mkdir && { - - # With -d, create the new directory with the user-specified mode. - # Otherwise, create it using the same intermediate mode that - # mkdir -p would use when creating intermediate directories. - # POSIX says that this mode is "$(umask -S),u+wx", so use that - # if umask -S works. - - if test -n "$dir_arg"; then - mkdir_mode=$mode - else - case $intermediate_mode in - '') - if umask_S=`(umask -S) 2>/dev/null`; then - intermediate_mode=$umask_S,u+wx - else - intermediate_mode=$test_mode - fi ;; - esac - mkdir_mode=$intermediate_mode - fi - - $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" - } + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) then : else - # mkdir does not conform to POSIX, or it failed possibly due to - # a race condition. Create the directory the slow way, step by - # step, checking for races as we go. + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix=/ ;; @@ -349,7 +397,8 @@ prefixes= else if $posix_mkdir; then - $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" && break + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else @@ -365,7 +414,9 @@ if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. - eval "\$mkdirprog $prefixes" || test -d "$dstdir" || exit 1 + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi @@ -375,7 +426,7 @@ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dst"; } || exit 1 + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. @@ -386,7 +437,7 @@ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # @@ -397,7 +448,7 @@ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$mode" "$dsttmp"; } && + && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # Now rename the file to the real destination. { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
--- a/doc/ChangeLog +++ b/doc/ChangeLog @@ -1,3 +1,8 @@ +2006-07-09 Paul Eggert <eggert@cs.ucla.edu> + + * maintain.texi, make-stds.texi: Sync from + <http://savannah.gnu.org/projects/gnustandards>. + 2006-06-29 Eric Blake <ebb9@byu.net> * functions.texi (Function Portability): Document missing lstat
--- a/doc/maintain.texi +++ b/doc/maintain.texi @@ -5,7 +5,7 @@ @c For double-sided printing, uncomment: @c @setchapternewpage odd @c This date is automagically updated when you save this file: -@set lastupdate March 22, 2006 +@set lastupdate July 1, 2006 @c %**end of header @dircategory GNU organization @@ -1077,6 +1077,8 @@ @menu * Automated Upload Registration:: * Automated Upload Procedure:: +* FTP Upload Directive File - v1.1:: +* FTP Upload Directive File - v1.0:: @end menu @@ -1118,7 +1120,7 @@ @cindex uploads -Once you have registered your information, as described in the +Once you have registered your information as described in the previous section, you will be able to do unattended ftp uploads using the following procedure. @@ -1128,7 +1130,7 @@ @enumerate @item -File to distributed (e.g., @file{foo.tar.gz}). +The file to be distributed (for example, @file{foo.tar.gz}). @item Detached GPG binary signature for (1), made using @samp{gpg -b} @@ -1137,24 +1139,149 @@ @item A clearsigned @dfn{directive file}, made using @samp{gpg --clearsign} (for example, @file{foo.tar.gz.directive.asc}). - @end enumerate -Upload the triplet via anonymous ftp to @code{ftp-upload.gnu.org}. If -the upload is destined for @code{ftp.gnu.org}, then place the triplet -in the @file{/incoming/ftp} directory. If the upload is destined for -@code{alpha.gnu.org}, then place the triplet in the -@file{/incoming/alpha} directory. +The names of the files are important. The signature file must have the +same name as the file to be distributed, with an additional +@file{.sig} extension. The directive file must have the same name as +the file to be distributed, with an additional @file{.directive.asc +extension}. If you do not follow this naming convention, the upload +@emph{will not be processed}. + +Since v1.1 of the upload script, it is also possible to upload a +@dfn{directive file} on its own to perform certain operations on +uploaded files. @xref{FTP Upload Directive File - v1.1}, for more +information. + +Upload the file(s) via anonymous ftp to @code{ftp-upload.gnu.org}. If +the upload is destined for @code{ftp.gnu.org}, place the file(s) in +the @file{/incoming/ftp} directory. If the upload is destined for +@code{alpha.gnu.org}, place the file(s) in the @file{/incoming/alpha} +directory. + +Uploads are processed every five minutes. Uploads that are in progress while +the upload processing script is running are handled properly, so do not worry +about the timing of your upload. + +Your designated upload email addresses (@pxref{Automated Upload Registration}) +are sent a message if there are any problems processing an upload for your +package. You also receive a message when your upload has been successfully +processed. + +If you have difficulties processing an upload, email +@email{ftp-upload@@gnu.org}. + + +@node FTP Upload Directive File - v1.1 +@subsection FTP Upload Directive File - v1.1 + +The directive file name must end in @file{directive.asc}. + +When part of a triplet, the directive file must always contain the +directives @code{version}, @code{directory} and @code{filename}, as +described. In addition, a 'comment' directive is allowed. + +The @code{version} directive must always have the value @samp{1.1}. + +The @code{directory} directive specifies the final destination +directory where the uploaded file and its @file{.sig} companion are to +be placed. + +The @code{filename} directive must contain the name of the file to be +distributed (item@tie{}(1) above). + +For example, as part of an uploaded triplet, a +@file{foo.tar.gz.directive.asc} file might contain these lines (before +being gpg clearsigned): + +@example +version: 1.1 +directory: bar/v1 +filename: foo.tar.gz +comment: hello world! +@end example + +This directory line indicates that @file{foo.tar.gz} and +@file{foo.tar.gz.sig} are part of package @code{bar}. If you uploaded +this triplet to @file{/incoming/ftp} and the system positively +authenticates the signatures, the files @file{foo.tar.gz} and +@file{foo.tar.gz.sig} will be placed in the directory +@file{gnu/bar/v1} of the @code{ftp.gnu.org} site. -Uploads are processed every five minutes. Uploads that are in -progress when the upload processing script is running are handled -properly, so do not worry about the timing of your upload. +The directive file can be used to create currently non-existent +directory trees, as long as they are under the package directory for +your package (in the example above, that is @code{bar}). + +If you upload a file that already exists in the FTP directory, the +original will simply be archived and replaced with the new upload. + +@subheading Standalone directives + +When uploaded by itself, the directive file must contain one or more +of the directives @code{symlink}, @code{rmsymlink} or @code{archive}, +in addition to the obligatory @code{directory} and @code{version} +directives. A @code{filename} directive is not allowed, and a +@code{comment} directive is optional. + +If you use more than one directive, the directives are executed in the +sequence they are specified in. + +Here are a few examples. The first removes a symlink: + +@example +version: 1.1 +directory: bar/v1 +rmsymlink: foo-latest.tgz +comment: remove a symlink +@end example + +@noindent +Archive an old file, taking it offline: + +@example +version: 1.1 +directory: bar/v1 +archive: foo-1.1.tar.gz +comment: archive an old file - it will not be available through FTP anymore +@end example + +@noindent +Create a new symlink: + +@example +version: 1.1 +directory: bar/v1 +symlink: foo-1.2.tar.gz foo-latest.tgz +comment: create a new symlink +@end example + +@noindent +Do everything at once: + +@example +version: 1.1 +directory: bar/v1 +rmsymlink: foo-latest.tgz +symlink: foo-1.2.tar.gz foo-latest.tgz +archive: foo-1.1.tar.gz +comment: now do everything at once +@end example + + +@node FTP Upload Directive File - v1.0 +@subsection FTP Upload Directive File - v1.0 + +@dfn{As of June 2006, the upload script is running in compatibility +mode, allowing uploads with either version@tie{}1.1 or +version@tie{}1.0 of the directive file syntax. Support for v1.0 +uploads will be phased out by the end of 2006, so please upgrade +to@tie{}v1.1.} The directive file should contain one line, excluding the clearsigned data GPG that inserts, which specifies the final destination directory -where items (1) and (2) to be placed. +where items (1) and (2) are to be placed. -For example, the @file{foo.tar.gz.directive} file might contain the +For example, the @file{foo.tar.gz.directive.asc} file might contain the single line: @example @@ -1172,14 +1299,6 @@ directory trees, as long as they are under the package directory for your package (in the example above, that is @code{bar}). -Your designated upload email addresses (@pxref{Automated Upload -Registration}) are sent a message if there are any problems processing -an upload for your package. You also receive a message when your -+upload has been successfully processed. - -If you have difficulties processing an upload, email -@email{ftp-upload@@gnu.org}. - @node Announcements @section Announcing Releases
--- a/doc/make-stds.texi +++ b/doc/make-stds.texi @@ -305,8 +305,9 @@ @end example @noindent -(Since the value of @code{DESTDIR} is only used during installation it -is not necessary to provide it with other @code{make} commands.) +Since the value of @code{DESTDIR} is only used during installation, it +should only be supported in the @code{install*} and @code{uninstall*} +targets. If your installation step would normally install @file{/usr/local/bin/foo} and @file{/usr/local/lib/libfoo.a}, then an @@ -564,8 +565,7 @@ @itemx pdfdir @itemx psdir Directories for installing documentation files in the particular -format. (It is not required to support documentation in all these -formats.) They should all be set to @code{$(docdir)} by default. (If +format. They should all be set to @code{$(docdir)} by default. (If you are using Autoconf, write them as @samp{@@htmldir@@}, @samp{@@dvidir@@}, etc.) Packages which supply several translations of their documentation should install them in @@ -694,8 +694,9 @@ @item all Compile the entire program. This should be the default target. This target need not rebuild any documentation files; Info files should -normally be included in the distribution, and DVI files should be made -only when explicitly asked for. +normally be included in the distribution, and DVI (and other +documentation format) files should be made only when explicitly asked +for. By default, the Make rules should compile and link with @samp{-g}, so that executable programs have debugging symbols. Users who don't mind @@ -734,7 +735,7 @@ Here is a sample rule to install an Info file: @comment This example has been carefully formatted for the Make manual. -@comment Please do not reformat it without talking to roland@gnu.ai.mit.edu. +@comment Please do not reformat it without talking to bug-make@gnu.org. @smallexample $(DESTDIR)$(infodir)/foo.info: foo.info $(POST_INSTALL) @@ -777,6 +778,9 @@ certainly want to use subdirectories, or two nodes with the same name in different manuals will overwrite each other. +Please make these @code{install-@var{format}} targets depend on the +correspond @var{format} target. + @item uninstall Delete all the installed files---the copies that the @samp{install} and @samp{install-*} targets create.