Mercurial > hg > octave-lyh > gnulib-hg
changeset 4903:a73a6023d4a5
update from automake
author | Karl Berry <karl@freefriends.org> |
---|---|
date | Fri, 09 Jan 2004 13:29:29 +0000 |
parents | 557b7b5a92c7 |
children | 5331b5c2ca2a |
files | config/ChangeLog config/install-sh |
diffstat | 2 files changed, 148 insertions(+), 130 deletions(-) [+] |
line wrap: on
line diff
--- a/config/ChangeLog +++ b/config/ChangeLog @@ -1,3 +1,7 @@ +2004-01-09 Karl Berry <karl@gnu.org> + + * install-sh: update from automake. + 2004-01-05 Karl Berry <karl@gnu.org> * config.{sub,guess}: update from config.
--- a/config/install-sh +++ b/config/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2003-09-24.23 +scriptversion=2004-01-08.23 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -72,7 +72,8 @@ dir_arg= usage="Usage: $0 [OPTION]... SRCFILE DSTFILE - or: $0 -d DIR1 DIR2... + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 -d DIRECTORIES... In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default. In the second, create the directory path DIR. @@ -134,153 +135,166 @@ --version) echo "$0 $scriptversion"; exit 0;; - *) if test -z "$src"; then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; + *) # When -d is used, all remaining arguments are directories to create. + test -n "$dir_arg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + shift + if test -n "$dstarg"; then + set fnord "$@" "$dstarg" + shift + fi + dstarg=$arg + done + break;; esac done -if test -z "$src"; then - echo "$0: no input file specified." >&2 - exit 1 -fi - -# Protect names starting with `-'. -case $src in - -*) src=./$src ;; -esac - -if test -n "$dir_arg"; then - dst=$src - src= - - if test -d "$dst"; then - instcmd=: - chmodcmd= - else - instcmd=$mkdirprog - fi -else - # Waiting for this to be detected by the "$instcmd $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 exit 1 fi - - if test -z "$dst"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - dst=$dst/`basename "$src"` - fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 fi -# This sed command emulates the dirname command. -dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac -# Skip lots of stat calls in the usual case. -if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - IFS=$oIFS - - pathcomp= + if test -n "$dir_arg"; then + dst=$src + src= - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 - shift - test -d "$pathcomp" || $mkdirprog "$pathcomp" - pathcomp=$pathcomp/ - done -fi + if test -d "$dst"; then + instcmd=: + chmodcmd= + else + instcmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$instcmd $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi -if test -n "$dir_arg"; then - $doit $instcmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi -else - # If we're going to rename the final executable, determine the name now. - if test -z "$transformarg"; then - dstfile=`basename "$dst"` - else - dstfile=`basename "$dst" $transformbasename \ - | sed $transformarg`$transformbasename + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + dst=$dst/`basename "$src"` + fi fi - # don't allow the sed command to completely eliminate the filename. - test -z "$dstfile" && dstfile=`basename "$dst"` + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + + # Make sure that the destination directory exists. - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + IFS=$oIFS + + pathcomp= - # Trap to clean up those temp files at exit. - trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 - trap '(exit $?); exit' 1 2 13 15 + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + test -d "$pathcomp" || $mkdirprog "$pathcomp" + pathcomp=$pathcomp/ + done + fi - # Move or copy the file name to the temp name - $doit $instcmd "$src" "$dsttmp" && + if test -n "$dir_arg"; then + $doit $instcmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + # If we're going to rename the final executable, determine the name now. + if test -z "$transformarg"; then + dstfile=`basename "$dst"` + else + dstfile=`basename "$dst" $transformbasename \ + | sed $transformarg`$transformbasename + fi - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $instcmd $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + # don't allow the sed command to completely eliminate the filename. + test -z "$dstfile" && dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Move or copy the file name to the temp name + $doit $instcmd "$src" "$dsttmp" && - # Now remove or move aside any old file at destination location. We - # try this two ways since rm can't unlink itself on some systems and - # the destination file might be busy for other reasons. In this case, - # the final cleanup might fail but the new file should still install - # successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ - || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit - } - else - : - fi - } && + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $instcmd $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" -fi && + # Now remove or move aside any old file at destination location. We + # try this two ways since rm can't unlink itself on some systems and + # the destination file might be busy for other reasons. In this case, + # the final cleanup might fail but the new file should still install + # successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + fi || { (exit 1); exit; } +done # The final little trick to "correctly" pass the exit status to the exit trap. {