Mercurial > hg > octave-terminal
changeset 3245:2270329efd14
[project @ 1999-06-10 03:36:21 by jwe]
author | jwe |
---|---|
date | Thu, 10 Jun 1999 03:36:21 +0000 |
parents | 7f8827f4040a |
children | a41cc560087a |
files | README.MachTen |
diffstat | 1 files changed, 180 insertions(+), 0 deletions(-) [+] |
line wrap: on
line diff
new file mode 100644 --- /dev/null +++ b/README.MachTen @@ -0,0 +1,180 @@ +The information in this file is from A. Scottedward Hodel +<A.S.Hodel@Eng.Auburn.EDU>. + +I've installed and run Octave 2.0.12 on Power MachTen 4.1. I've +also installed Octave-2.1.14 on Power MachTen 4.1.1 (the process is slightly +different). This note contains instructions on how to port octave to MachTen +4.1/4.1.1. + +Many thanks to Tenon Intersystems support for their help in porting to +Machten 4.1.1. + +Contents: +(1) Definitions +(2) Future work +(3) Instructions for installation of Octave 2.0.12 on MachTen 4.1. +(4) Instructions for installation of Octave 2.1.14 on MachTen 4.1.1. + +(1) Definitions: +============ +Power MachTen: Unix that runs simultaneously with MacOS on Mac computers. + see http://tenon.com for more information. + +Octave: a Matlab-like programming language that is freely distributable + under the terms of the gnu copyright rules. Octave is NOT + (and will not) be a MATLAB(tm) clone; however, the functionality + of the program is similar. + + see: http://bevo.che.wisc.edu/octave for more information. + a control systems toolbox is available at + ftp://ftp.eng.auburn.edu/pub/hodel/OCST* + +(2) Future work: +============= +Dynamic linking is apparently not yet supported, so .oct files cannot be used +(yet) in Power MachTen. + +(3) To install Octave on MachTen 4.1: +============= +Short instructions: MachTen automatically defines __MACHTEN_PPC__ on +power MachTen. The octave configure script sets most everything up properly. +Here's a few details that also need done: + +(a) Put libncurses into the Tenon Application Library Folder +(b) Replace the MT /usr/bin/sed with gnu sed (I used 2-0.5). +(c) <sys/signal.h>: Is fixed in MachTen 4.1.1 +(d) Set virtual memory to a huge number (I used 200Mb) +(f) make all; it will fail on toplev.cc due to a problem with src/oct-conf.h +(g) Fix src/oct-conf.h and make all again. +(g) make install + +Here are the details for the above items: +(a) Be sure that libncurses is in the Tenon Application Library in + the Extensions folder: + + (i) use resedit. + (ii) Open the libncurses file in folder: + Extensions/Tenon Applications Library/disabled + (iii) Open the cfrag resource. Scroll down a bit and you will find the + string libcurses. Change it to libncurses. Save. + (iv) Change (File Menu/File Information) the file creator to MUMM. Save. + (v) now move libncurses out of the disabled folder to + Extensions/Tenon Applications Library + (vi) Reboot. + +(b) Replace the MT /usr/bin/sed with gnu sed (I used 2-0.5). + This fixes a problem with the kpathsea/klibtool script. + +(c) Login as root and apply the following patch to /usr/include/sys/signal.h: + Otherwise src/sighandlers.cc will not compile properly. (The change + is consistent with <sys/signal.h> headers on our sun network as well.) + +*** signal.h.old Thu May 7 13:16:11 1998 +--- signal.h Thu May 7 13:34:27 1998 +*************** +*** 253,260 **** + /* + * Signal vector "template" used in sigaction call. + */ +! #struct sigaction { + void (*sa_handler)(); /* signal handler */ + sigset_t sa_mask; /* signal mask to apply */ + int sa_flags; /* see signal options below */ + }; +--- 253,264 ---- + /* + * Signal vector "template" used in sigaction call. + */ +! struct sigaction { +! #ifdef __cplusplus +! void (*sa_handler)(int); /* signal handler */ +! #else + void (*sa_handler)(); /* signal handler */ ++ #endif + sigset_t sa_mask; /* signal mask to apply */ + int sa_flags; /* see signal options below */ + }; + + +(d) Set virtual memory to a huge number (I used 120Mb). Otherwise compiles + will fail. + +(e) (cd src ; make oct-conf.h) + +(f) Fix src/oct-conf.h + + You'll need to change the line + + #define DEFS "-DOCTAVE_SOURCE=1 -DSEPCHAR=':' -DSEPCHAR_STR=":" + to + #define DEFS "-DOCTAVE_SOURCE=1 -DSEPCHAR=':' -DSEPCHAR_STR=\":\" + + It should have been done automatically (take a look at UGLY_DEFS in + the toplevel Makeconf), but for some reason it doesn't go. Failure to + edit oct-conf.h results in a compilation error in toplev.cc. + +(g) make all +(h) make install + +And that should do it. + +(4) To install Octave on MachTen 4.1.1: +============= +Short instructions: MachTen automatically defines __MACHTEN_PPC__ on +power MachTen. The octave configure script sets most everything up properly. +Here's a few details that also need done: + +(a) libncurses, sed, and <sys/signal.h>: are fixed in PowerMachTen 4.1.1 (but not in + 4.1) +(b) Power MachTen uses gcc-2.8.1, which requires more memory than the + version used in PowerMachTen 4.1. I set virtual memory to 200 Mb. +(c) From Tenon technical support: (Thanks!) + >I think that we have compiling Octave on MachTen. The problem results + >from the fact that the stack space on the f771 application is not set. + >This results in f771 running out of memory and corrupting the system + >process manager heap. To fix this, try: + > + >setstackspace 0x100000 /usr/lib/gcc-lib/powerpc-apple/machten4/2.8.1/f771 + + For some reason my system didn't follow the soft links to + /usr/macppc/lib/gcc-lib/powerpc-apple-machten4/2.8.1/f771. I was + able to do the command manually with the above path. + +(d) For increased speed in compiling and decreased disk space requirements, + you may also wish to omit the "-g" flag from compiler options: + in the configure script: + - search for machten (line 2651 in 0ctave-2.1.14). + - modify so that this section reads + powerpc-apple-machten*) + FFLAGS= + # remove -g to keep binary size down + CFLAGS=`echo ${CFLAGS} | sed '1,$s/-g//'` + CXXFLAGS=`echo ${CXXFLAGS} | sed '1,$s/-g//'` + LDFLAGS=`echo ${LDFLAGS} | sed '1,$s/-g//'` + ;; + + Also remove -g from: + LDFLAGS in readline/examples/Makefile.in + +(e) Run configure (use the --prefix flag if desired) + +(f) (cd src ; make oct-conf.h) + +(g) Fix src/oct-conf.h + + You'll need to change the line + + #define DEFS "-DOCTAVE_SOURCE=1 -DSEPCHAR=':' -DSEPCHAR_STR=":" + to + #define DEFS "-DOCTAVE_SOURCE=1 -DSEPCHAR=':' -DSEPCHAR_STR=\":\" + + It should have been done automatically (take a look at UGLY_DEFS in + the toplevel Makeconf), but for some reason it doesn't go. Failure to + edit oct-conf.h results in a compilation error in toplev.cc. + +(h) make all + + Be prepared to wait quite awhile. Most of the time is spent waiting + for individual ar commands to build the libraries. + +(i) make install