Mercurial > hg > octave-terminal
changeset 12722:9bd02687444b
maint: Remove obsolete files dir, eos.txi from doc/interpreter
* dir, eos.txi: Remove from source control
author | Rik <octave@nomad.inbox5.com> |
---|---|
date | Wed, 08 Jun 2011 19:02:50 -0700 |
parents | 6835bc816ef2 |
children | ff4773f01b6a |
files | doc/interpreter/dir doc/interpreter/eos.txi |
diffstat | 2 files changed, 0 insertions(+), 529 deletions(-) [+] |
line wrap: on
line diff
deleted file mode 100644 --- a/doc/interpreter/dir +++ /dev/null @@ -1,14 +0,0 @@ --*- Text -*- -This is the file .../info/dir, which contains the topmost node of the -Info hierarchy. The first time you invoke Info you start off -looking at that node, which is (dir)Top. - -File: dir Node: Top This is the top of the INFO tree - This (the Directory node) gives a menu of major topics. - Typing "d" returns here, "q" exits, "?" lists all INFO commands, "h" - gives a primer for first-timers, "mItem<Return>" visits the menu - item named `Item', etc. - -* Menu: The list of major topics begins on the next line. - -* Octave: (octave). Interactive language for numerical computations.
deleted file mode 100644 --- a/doc/interpreter/eos.txi +++ /dev/null @@ -1,515 +0,0 @@ -@c Copyright (C) 1996-2011 Kurt Hornik -@c -@c This file is part of Octave. -@c -@c Octave is free software; you can redistribute it and/or modify it -@c under the terms of the GNU General Public License as published by the -@c Free Software Foundation; either version 3 of the License, or (at -@c your option) any later version. -@c -@c Octave is distributed in the hope that it will be useful, but WITHOUT -@c ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -@c FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -@c for more details. -@c -@c You should have received a copy of the GNU General Public License -@c along with Octave; see the file COPYING. If not, see -@c <http://www.gnu.org/licenses/>. - -@c Written by Kurt Hornik <Kurt.Hornik@wu-wien.ac.at> on 1996/05/17. -@c Last updated by KH on 1997/07/31. - -@node Emacs -@chapter Emacs Octave Support - -The development of Octave code can greatly be facilitated using Emacs -with Octave mode -automatically indent the code, do some of the typing (with Abbrev mode) -and show keywords, comments, strings, etc.@: in different faces (with -Font-lock mode on devices that support it). - -It is also possible to run Octave from within Emacs, either by directly -entering commands at the prompt in a buffer in Inferior Octave mode, or -by interacting with Octave from within a file with Octave code. This is -useful in particular for debugging Octave code. - -Finally, you can convince Octave to use the Emacs info reader for -@kbd{help -i}. - -All functionality is provided by the Emacs Lisp package EOS (for ``Emacs -Octave Support''). This chapter describes how to set up and use this -package. - -Please contact @email{Kurt.Hornik@@wu-wien.ac.at} if you have any questions -or suggestions on using EOS. - -@menu -* Installing EOS:: -* Using Octave Mode:: -* Running Octave From Within Emacs:: -* Using the Emacs Info Reader for Octave:: -@end menu - -@node Installing EOS -@section Installing EOS - -The Emacs package EOS consists of the three files @file{octave-mod.el}, -@file{octave-inf.el}, and @file{octave-hlp.el}. These files, or better -yet their byte-compiled versions, should be somewhere in your Emacs -load-path. - -If you have GNU Emacs with a version number at least as high as 19.35, -you are all set up, because EOS is respectively will be part of GNU -Emacs as of version 19.35. - -Otherwise, copy the three files from the @file{emacs} subdirectory of -the Octave distribution to a place where Emacs can find them (this -depends on how your Emacs was installed). Byte-compile them for speed -if you want. - -@node Using Octave Mode -@section Using Octave Mode - -If you are lucky, your sysadmins have already arranged everything so -that Emacs automatically goes into Octave mode whenever you visit an -Octave code file as characterized by its extension @file{.m}. If not, -proceed as follows. - -@enumerate -@item -To begin using Octave mode for all @file{.m} files you visit, add the -following lines to a file loaded by Emacs at startup time, typically -your @file{~/.emacs} file: - -@lisp -(autoload 'octave-mode "octave-mod" nil t) -(setq auto-mode-alist - (cons '(\"\\\\.m$\" . octave-mode) auto-mode-alist)) -@end lisp - -@item -Finally, to turn on the abbrevs, auto-fill and font-lock features -automatically, also add the following lines to one of the Emacs startup -files: -@lisp -(add-hook 'octave-mode-hook - (lambda () - (abbrev-mode 1) - (auto-fill-mode 1) - (if (eq window-system 'x) - (font-lock-mode 1)))) -@end lisp -See the Emacs manual for more information about how to customize -Font-lock mode. -@end enumerate - -In Octave mode, the following special Emacs commands can be used in -addition to the standard Emacs commands. - -@table @kbd -@item C-h m -Describe the features of Octave mode. - -@item LFD -Reindent the current Octave line, insert a newline and indent the new -line (@code{octave-reindent-then-newline-and-indent}). An abbrev before -point is expanded if @code{abbrev-mode} is non-@code{nil}. - -@item TAB -Indents current Octave line based on its contents and on previous -lines (@code{indent-according-to-mode}). - -@item ; -Insert an ``electric'' semicolon (@code{octave-electric-semi}). If -@code{octave-auto-indent} is non-@code{nil}, reindent the current line. -If @code{octave-auto-newline} is non-@code{nil}, automagically insert a -newline and indent the new line. - -@item ` -Start entering an abbreviation (@code{octave-abbrev-start}). If Abbrev -mode is turned on, typing @kbd{`C-h} or @kbd{`?} lists all abbrevs. -Any other key combination is executed normally. Note that all Octave -abbrevs start with a grave accent. - -@item M-LFD -Break line at point and insert continuation marker and alignment -(@code{octave-split-line}). - -@item M-TAB -Perform completion on Octave symbol preceding point, comparing that -symbol against Octave's reserved words and built-in variables -(@code{octave-complete-symbol}). - -@item M-C-a -Move backward to the beginning of a function -(@code{octave-beginning-of-defun}). -With prefix argument @var{N}, do it that many times if @var{N} is -positive; otherwise, move forward to the @var{N}-th following beginning -of a function. - -@item M-C-e -Move forward to the end of a function (@code{octave-end-of-defun}). -With prefix argument @var{N}, do it that many times if @var{N} is -positive; otherwise, move back to the @var{N}-th preceding end of a -function. - -@item M-C-h -Puts point at beginning and mark at the end of the current Octave -function, i.e., the one containing point or following point -(@code{octave-mark-defun}). - -@item M-C-q -Properly indents the Octave function which contains point -(@code{octave-indent-defun}). - -@item M-; -If there is no comment already on this line, create a code-level comment -(started by two comment characters) if the line is empty, or an in-line -comment (started by one comment character) otherwise -(@code{octave-indent-for-comment}). -Point is left after the start of the comment which is properly aligned. - -@item C-c ; -Puts the comment character @samp{#} (more precisely, the string value of -@code{octave-comment-start}) at the beginning of every line in the -region (@code{octave-comment-region}). With just @kbd{C-u} prefix -argument, uncomment each line in the region. A numeric prefix argument -@var{N} means use @var{N} comment characters. - -@item C-c : -Uncomments every line in the region (@code{octave-uncomment-region}). - -@item C-c C-p -Move one line of Octave code backward, skipping empty and comment lines -(@code{octave-previous-code-line}). With numeric prefix argument -@var{N}, move that many code lines backward (forward if @var{N} is -negative). - -@item C-c C-n -Move one line of Octave code forward, skipping empty and comment lines -(@code{octave-next-code-line}). With numeric prefix argument @var{N}, -move that many code lines forward (backward if @var{N} is negative). - -@item C-c C-a -Move to the `real' beginning of the current line -(@code{octave-beginning-of-line}). If point is in an empty or comment -line, simply go to its beginning; otherwise, move backwards to the -beginning of the first code line which is not inside a continuation -statement, i.e., which does not follow a code line ending in @samp{...} -or @samp{\}, or is inside an open parenthesis list. - -@item C-c C-e -Move to the `real' end of the current line (@code{octave-end-of-line}). -If point is in a code line, move forward to the end of the first Octave -code line which does not end in @samp{...} or @samp{\} or is inside an -open parenthesis list. Otherwise, simply go to the end of the current -line. - -@item C-c M-C-n -Move forward across one balanced begin-end block of Octave code -(@code{octave-forward-block}). With numeric prefix argument @var{N}, -move forward across @var{n} such blocks (backward if @var{N} is -negative). - -@item C-c M-C-p -Move back across one balanced begin-end block of Octave code -(@code{octave-backward-block}). With numeric prefix argument @var{N}, -move backward across @var{N} such blocks (forward if @var{N} is -negative). - -@item C-c M-C-d -Move forward down one begin-end block level of Octave code -(@code{octave-down-block}). With numeric prefix argument, do it that -many times; a negative argument means move backward, but still go down -one level. - -@item C-c M-C-u -Move backward out of one begin-end block level of Octave code -(@code{octave-backward-up-block}). With numeric prefix argument, do it -that many times; a negative argument means move forward, but still to a -less deep spot. - -@item C-c M-C-h -Put point at the beginning of this block, mark at the end -(@code{octave-mark-block}). -The block marked is the one that contains point or follows point. - -@item C-c ] -Close the current block on a separate line (@code{octave-close-block}). -An error is signaled if no block to close is found. - -@item C-c f -Insert a function skeleton, prompting for the function's name, arguments -and return values which have to be entered without parentheses -(@code{octave-insert-defun}). - -@item C-c C-h -Search the function, operator and variable indices of all info files -with documentation for Octave for entries (@code{octave-help}). If used -interactively, the entry is prompted for with completion. If multiple -matches are found, one can cycle through them using the standard -@samp{,} (@code{Info-index-next}) command of the Info reader. - -The variable @code{octave-help-files} is a list of files to search -through and defaults to @code{'("octave")}. If there is also an Octave -Local Guide with corresponding info file, say, @file{octave-LG}, you can -have @code{octave-help} search both files by -@lisp -(setq octave-help-files '("octave" "octave-LG")) -@end lisp -@noindent -in one of your Emacs startup files. - -@end table - -A common problem is that the @key{RET} key does @emph{not} indent the -line to where the new text should go after inserting the newline. This -is because the standard Emacs convention is that @key{RET} (aka -@kbd{C-m}) just adds a newline, whereas @key{LFD} (aka @kbd{C-j}) adds a -newline and indents it. This is particularly inconvenient for users with -keyboards which do not have a special @key{LFD} key at all; in such -cases, it is typically more convenient to use @key{RET} as the @key{LFD} -key (rather than typing @kbd{C-j}). - -You can make @key{RET} do this by adding -@lisp -(define-key octave-mode-map "\C-m" - 'octave-reindent-then-newline-and-indent) -@end lisp -@noindent -to one of your Emacs startup files. Another, more generally applicable -solution is -@lisp -(defun RET-behaves-as-LFD () - (let ((x (key-binding "\C-j"))) - (local-set-key "\C-m" x))) -(add-hook 'octave-mode-hook 'RET-behaves-as-LFD) -@end lisp -@noindent -(this works for all modes by adding to the startup hooks, without having -to know the particular binding of @key{RET} in that mode!). Similar -considerations apply for using @key{M-RET} as @key{M-LFD}. As Barry -A. Warsaw @email{bwarsaw@@cnri.reston.va.us} says in the documentation for his -@code{cc-mode}, ``This is a very common question. @code{:-)} If you want -this to be the default behavior, don't lobby me, lobby RMS!'' - -The following variables can be used to customize Octave mode. - -@table @code -@item octave-auto-indent -Non-@code{nil} means auto-indent the current line after a semicolon or -space. Default is @code{nil}. - -@item octave-auto-newline -Non-@code{nil} means auto-insert a newline and indent after semicolons -are typed. The default value is @code{nil}. - -@item octave-blink-matching-block -Non-@code{nil} means show matching begin of block when inserting a space, -newline or @samp{;} after an else or end keyword. Default is @code{t}. -This is an extremely useful feature for automatically verifying that the -keywords match---if they don't, an error message is displayed. - -@item octave-block-offset -Extra indentation applied to statements in block structures. -Default is 2. - -@item octave-continuation-offset -Extra indentation applied to Octave continuation lines. -Default is 4. - -@item octave-continuation-string -String used for Octave continuation lines. -Normally @samp{\}. - -@item octave-mode-startup-message -If @code{t} (default), a startup message is displayed when Octave mode -is called. - -@end table - -If Font Lock mode is enabled, Octave mode will display -@itemize @bullet -@item -strings in @code{font-lock-string-face} - -@item -comments in @code{font-lock-comment-face} - -@item -the Octave reserved words (such as all block keywords) and the text -functions (such as @samp{cd} or @samp{who}) which are also reserved -using @code{font-lock-keyword-face} - -@item -the built-in operators (@samp{&&}, @samp{==}, @dots{}) using -@code{font-lock-reference-face} - -@item -and the function names in function declarations in -@code{font-lock-function-name-face}. -@end itemize - -There is also rudimentary support for Imenu (currently, function names -can be indexed). - -Customization of Octave mode can be performed by modification of the -variable @code{octave-mode-hook}. It the value of this variable is -non-@code{nil}, turning on Octave mode calls its value. - -If you discover a problem with Octave mode, you can conveniently send a -bug report using @kbd{C-c C-b} (@code{octave-submit-bug-report}). This -automatically sets up a mail buffer with version information already -added. You just need to add a description of the problem, including a -reproducible test case and send the message. - -@node Running Octave From Within Emacs -@section Running Octave From Within Emacs - -The package @file{octave} provides commands for running an inferior -Octave process in a special Emacs buffer. Use -@lisp -M-x run-octave -@end lisp -@noindent -to directly start an inferior Octave process. If Emacs does not know -about this command, add the line -@lisp -(autoload 'run-octave "octave-inf" nil t) -@end lisp -@noindent -to your @file{.emacs} file. - -This will start Octave in a special buffer the name of which is -specified by the variable @code{inferior-octave-buffer} and defaults to -@code{"*Inferior Octave*"}. From within this buffer, you can -interact with the inferior Octave process `as usual', i.e., by entering -Octave commands at the prompt. The buffer is in Inferior Octave mode, -which is derived from the standard Comint mode, a major mode for -interacting with an inferior interpreter. See the documentation for -@code{comint-mode} for more details, and use @kbd{C-h b} to find out -about available special keybindings. - -You can also communicate with an inferior Octave process from within -files with Octave code (i.e., buffers in Octave mode), using the -following commands. - -@table @kbd -@item C-c i l -Send the current line to the inferior Octave process -(@code{octave-send-line}). -With positive prefix argument @var{N}, send that many lines. -If @code{octave-send-line-auto-forward} is non-@code{nil}, go to the -next unsent code line. - -@item C-c i b -Send the current block to the inferior Octave process -(@code{octave-send-block}). - -@item C-c i f -Send the current function to the inferior Octave process -(@code{octave-send-defun}). - -@item C-c i r -Send the region to the inferior Octave process -(@code{octave-send-region}). - -@item C-c i s -Make sure that `inferior-octave-buffer' is displayed -(@code{octave-show-process-buffer}). - -@item C-c i h -Delete all windows that display the inferior Octave buffer -(@code{octave-hide-process-buffer}). - -@item C-c i k -Kill the inferior Octave process and its buffer -(@code{octave-kill-process}). -@end table - -The effect of the commands which send code to the Octave process can be -customized by the following variables. -@table @code -@item octave-send-echo-input -Non-@code{nil} means echo input sent to the inferior Octave process. -Default is @code{t}. - -@item octave-send-show-buffer -Non-@code{nil} means display the buffer running the Octave process after -sending a command (but without selecting it). -Default is @code{t}. -@end table - -If you send code and there is no inferior Octave process yet, it will be -started automatically. - -The startup of the inferior Octave process is highly customizable. -The variable @code{inferior-octave-startup-args} can be used for -specifying command lines arguments to be passed to Octave on startup -as a list of strings. For example, to suppress the startup message and -use `traditional' mode, set this to @code{'("-q" "--traditional")}. -You can also specify a startup file of Octave commands to be loaded on -startup; note that these commands will not produce any visible output -in the process buffer. Which file to use is controlled by the variable -@code{inferior-octave-startup-file}. If this is @code{nil}, the file -@file{~/.emacs-octave} is used if it exists. - -And finally, @code{inferior-octave-mode-hook} is run after starting the -process and putting its buffer into Inferior Octave mode. Hence, if you -like the up and down arrow keys to behave in the interaction buffer as -in the shell, and you want this buffer to use nice colors, add -@lisp -(add-hook 'inferior-octave-mode-hook - (lambda () - (turn-on-font-lock) - (define-key inferior-octave-mode-map [up] - 'comint-previous-input) - (define-key inferior-octave-mode-map [down] - 'comint-next-input))) -@end lisp -@noindent -to your @file{.emacs} file. You could also swap the roles of @kbd{C-a} -(@code{beginning-of-line}) and @code{C-c C-a} (@code{comint-bol}) using -this hook. - -@quotation -@strong{Note:} -If you set your Octave prompts to something different from the defaults, -make sure that @code{inferior-octave-prompt} matches them. -Otherwise, @emph{nothing} will work, because Emacs will have no idea -when Octave is waiting for input, or done sending output. -@end quotation - -@node Using the Emacs Info Reader for Octave -@section Using the Emacs Info Reader for Octave - -You can also set up the Emacs Info reader for dealing with the results -of Octave's @samp{help -i}. For this, the package @file{gnuserv} needs -to be installed, which unfortunately still does not come with GNU Emacs -(it does with XEmacs). It can be retrieved from any GNU Emacs Lisp Code -Directory archive, e.g.@: -@url{ftp://ftp.cis.ohio-state.edu/pub/gnu/emacs/elisp-archive}, -in the @file{packages} subdirectory. The alpha version of an enhanced -version of gnuserv is available at -@url{ftp://ftp.wellfleet.com/netman/psmith/emacs/gnuserv-2.1alpha.tar.gz}. - -If @file{gnuserv} is installed, add the lines -@lisp -(autoload 'octave-help "octave-hlp" nil t) -(require 'gnuserv) -(gnuserv-start) -@end lisp -@noindent -to your @file{.emacs} file. - -You can use either `plain' Emacs Info or the function @code{octave-help} -as your Octave info reader (for @samp{help -i}). In the former case, -set the Octave variable @w{@env{INFO_PROGRAM}} to @code{"info-emacs-info"}. -The latter is perhaps more attractive because it allows to look up keys -in the indices of @emph{several} info files related to Octave (provided -that the Emacs variable @code{octave-help-files} is set correctly). In -this case, set @w{@env{INFO_PROGRAM}} to @code{"info-emacs-octave-help"}. - -If you use Octave from within Emacs, these settings are best done in the -@file{~/.emacs-octave} startup file (or the file pointed to by the Emacs -variable @code{inferior-octave-startup-file}).