Mercurial > hg > mercurial-source
changeset 37837:40206e227412
wireproto: define and implement protocol for issuing requests
The existing HTTP and SSH wire protocols suffer from a host of flaws
and shortcomings. I've been wanting to rewrite the protocol for a while
now. Supporting partial clone - which will require new wire protocol
commands and capabilities - and other advanced server functionality
will be much easier if we start from a clean slate and don't have
to be constrained by limitations of the existing wire protocol.
This commit starts to introduce a new data exchange format for
use over the wire protocol.
The new protocol is built on top of "frames," which are atomic
units of metadata + data. Frames will make it easier to implement
proxies and other mechanisms that want to inspect data without
having to maintain state. The existing frame metadata is very
minimal and it will evolve heavily. (We will eventually support
things like concurrent requests, out-of-order responses,
compression, side-channels for status updates, etc. Some of
these will require additions to the frame header.)
Another benefit of frames is that all reads are of a fixed size.
A reader works by consuming a frame header, extracting the payload
length, then reading that many bytes. No lookahead, buffering, or
memory reallocations are needed.
The new protocol attempts to be transport agnostic. I want all that's
required to use the new protocol to be a pair of unidirectional,
half-duplex pipes. (Yes, we will eventually make use of full-duplex
pipes, but that's for another commit.) Notably, when the SSH
transport switches to this new protocol, stderr will be unused.
This is by design: the lack of stderr on HTTP harms protocol
behavior there. By shoehorning everything into a pair of pipes,
we can have more consistent behavior across transports.
We currently only define the client side parts of the new protocol,
specifically the bits for requesting that a command run. This keeps
the new code and feature small and somewhat easy to review.
We add support to `hg debugwireproto` for writing frames into
HTTP request bodies. Our tests that issue commands to the new
HTTP endpoint have been updated to transmit frames. The server
bits haven't been touched to consume the frames yet. This will
occur in the next commit...
Astute readers may notice that the command name is transmitted in
both the HTTP request URL and the command request frame. This is
partially a kludge from me initially implementing the frame-based
protocol for SSH first. But it is also a feature: I intend to
eventually support issuing multiple commands per HTTP request. This
will allow us to replace the abomination that is the "batch" wire
protocol command with a protocol-level mechanism for performing
multi-dispatch. Because I want the frame-based protocol to be
as similar as possible across transports, I'd rather we (redundantly)
include the command name in the frame than differ behavior between
transports that have out-of-band routing information (like HTTP)
readily available.
Differential Revision: https://phab.mercurial-scm.org/D2851
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Mon, 19 Mar 2018 16:49:53 -0700 |
parents | 37d7a1d18b97 |
children | 8c3c47362934 |
files | mercurial/debugcommands.py mercurial/help/internals/wireprotocol.txt mercurial/wireprotoframing.py mercurial/wireprotoserver.py tests/test-http-api-httpv2.t |
diffstat | 5 files changed, 382 insertions(+), 20 deletions(-) [+] |
line wrap: on
line diff
--- a/mercurial/debugcommands.py +++ b/mercurial/debugcommands.py @@ -78,6 +78,7 @@ url as urlmod, util, vfs as vfsmod, + wireprotoframing, wireprotoserver, ) from .utils import dateutil @@ -2711,6 +2712,12 @@ The content of the file defined as the value to this argument will be transferred verbatim as the HTTP request body. + ``frame <type> <flags> <payload>`` + Send a unified protocol frame as part of the request body. + + All frames will be collected and sent as the body to the HTTP + request. + close ----- @@ -2750,6 +2757,28 @@ --------- ``read()`` N bytes from the server's stderr pipe, if available. + + Specifying Unified Frame-Based Protocol Frames + ---------------------------------------------- + + It is possible to emit a *Unified Frame-Based Protocol* by using special + syntax. + + A frame is composed as a type, flags, and payload. These can be parsed + from a string of the form ``<type> <flags> <payload>``. That is, 3 + space-delimited strings. + + ``payload`` is the simplest: it is evaluated as a Python byte string + literal. + + ``type`` can be an integer value for the frame type or the string name + of the type. The strings are defined in ``wireprotoframing.py``. e.g. + ``command-name``. + + ``flags`` is a ``|`` delimited list of flag components. Each component + (and there can be just one) can be an integer or a flag name for the + specified frame type. Values are resolved to integers and then bitwise + OR'd together. """ opts = pycompat.byteskwargs(opts) @@ -2953,6 +2982,7 @@ method, httppath = request[1:] headers = {} body = None + frames = [] for line in lines: line = line.lstrip() m = re.match(b'^([a-zA-Z0-9_-]+): (.*)$', line) @@ -2963,11 +2993,20 @@ if line.startswith(b'BODYFILE '): with open(line.split(b' ', 1), 'rb') as fh: body = fh.read() + elif line.startswith(b'frame '): + frame = wireprotoframing.makeframefromhumanstring( + line[len(b'frame '):]) + + frames.append(frame) else: raise error.Abort(_('unknown argument to httprequest: %s') % line) url = path + httppath + + if frames: + body = b''.join(bytes(f) for f in frames) + req = urlmod.urlreq.request(pycompat.strurl(url), body, headers) # urllib.Request insists on using has_data() as a proxy for
--- a/mercurial/help/internals/wireprotocol.txt +++ b/mercurial/help/internals/wireprotocol.txt @@ -187,12 +187,15 @@ Requests to unknown commands or URLS result in an HTTP 404. TODO formally define response type, how error is communicated, etc. -HTTP request and response bodies use the *TBD Protocol* for media exchange. +HTTP request and response bodies use the *Unified Frame-Based Protocol* +(defined below) for media exchange. The entirety of the HTTP message +body is 0 or more frames as defined by this protocol. Clients and servers MUST advertise the ``TBD`` media type via the ``Content-Type`` request and response headers. In addition, clients MUST advertise this media type value in their ``Accept`` request header in all requests. +TODO finalize the media type. For now, it is defined in wireprotoserver.py. Servers receiving requests without an ``Accept`` header SHOULD respond with an HTTP 406. @@ -429,7 +432,7 @@ SSH Version 2 Transport ----------------------- -**Experimental** +**Experimental and under development** Version 2 of the SSH transport behaves identically to version 1 of the SSH transport with the exception of handshake semantics. See above for how @@ -451,6 +454,164 @@ Following capabilities advertisement, the peers communicate using version 1 of the SSH transport. +Unified Frame-Based Protocol +============================ + +**Experimental and under development** + +The *Unified Frame-Based Protocol* is a communications protocol between +Mercurial peers. The protocol aims to be mostly transport agnostic +(works similarly on HTTP, SSH, etc). + +To operate the protocol, a bi-directional, half-duplex pipe supporting +ordered sends and receives is required. That is, each peer has one pipe +for sending data and another for receiving. + +The protocol is request-response based: the client issues requests to +the server, which issues replies to those requests. Server-initiated +messaging is not supported. + +All data is read and written in atomic units called *frames*. These +are conceptually similar to TCP packets. Higher-level functionality +is built on the exchange and processing of frames. + +Frames begin with a 4 octet header followed by a variable length +payload:: + + +-----------------------------------------------+ + | Length (24) | + +-----------+-----------------------------------+ + | Type (4) | + +-----------+ + | Flags (4) | + +===========+===================================================| + | Frame Payload (0...) ... + +---------------------------------------------------------------+ + +The length of the frame payload is expressed as an unsigned 24 bit +little endian integer. Values larger than 65535 MUST NOT be used unless +given permission by the server as part of the negotiated capabilities +during the handshake. The frame header is not part of the advertised +frame length. + +The 4-bit ``Type`` field denotes the type of message being sent. + +The 4-bit ``Flags`` field defines special, per-type attributes for +the frame. + +The sections below define the frame types and their behavior. + +Command Request (``0x01``) +-------------------------- + +This frame contains a request to run a command. + +The name of the command to run constitutes the entirety of the frame +payload. + +This frame type MUST ONLY be sent from clients to servers: it is illegal +for a server to send this frame to a client. + +The following flag values are defined for this type: + +0x01 + End of command data. When set, the client will not send any command + arguments or additional command data. When set, the command has been + fully issued and the server has the full context to process the command. + The next frame issued by the client is not part of this command. +0x02 + Command argument frames expected. When set, the client will send + *Command Argument* frames containing command argument data. +0x04 + Command data frames expected. When set, the client will send + *Command Data* frames containing a raw stream of data for this + command. + +The ``0x01`` flag is mutually exclusive with both the ``0x02`` and ``0x04`` +flags. + +Command Argument (``0x02``) +--------------------------- + +This frame contains a named argument for a command. + +The frame type MUST ONLY be sent from clients to servers: it is illegal +for a server to send this frame to a client. + +The payload consists of: + +* A 16-bit little endian integer denoting the length of the + argument name. +* A 16-bit little endian integer denoting the length of the + argument value. +* N bytes of ASCII data containing the argument name. +* N bytes of binary data containing the argument value. + +The payload MUST hold the entirety of the 32-bit header and the +argument name. The argument value MAY span multiple frames. If this +occurs, the appropriate frame flag should be set to indicate this. + +The following flag values are defined for this type: + +0x01 + Argument data continuation. When set, the data for this argument did + not fit in a single frame and the next frame will contain additional + argument data. + +0x02 + End of arguments data. When set, the client will not send any more + command arguments for the command this frame is associated with. + The next frame issued by the client will be command data or + belong to a separate request. + +Command Data (``0x03``) +----------------------- + +This frame contains raw data for a command. + +Most commands can be executed by specifying arguments. However, +arguments have an upper bound to their length. For commands that +accept data that is beyond this length or whose length isn't known +when the command is initially sent, they will need to stream +arbitrary data to the server. This frame type facilitates the sending +of this data. + +The payload of this frame type consists of a stream of raw data to be +consumed by the command handler on the server. The format of the data +is command specific. + +The following flag values are defined for this type: + +0x01 + Command data continuation. When set, the data for this command + continues into a subsequent frame. + +0x02 + End of data. When set, command data has been fully sent to the + server. The command has been fully issued and no new data for this + command will be sent. The next frame will belong to a new command. + +Issuing Commands +---------------- + +A client can request that a remote run a command by sending it +frames defining that command. This logical stream is composed of +1 ``Command Request`` frame, 0 or more ``Command Argument`` frames, +and 0 or more ``Command Data`` frames. + +Argument frames are the recommended mechanism for transferring fixed +sets of parameters to a command. Data frames are appropriate for +transferring variable data. A similar comparison would be to HTTP: +argument frames are headers and the message body is data frames. + +It is recommended for servers to delay the dispatch of a command +until all argument frames for that command have been received. Servers +MAY impose limits on the maximum argument size. +TODO define failure mechanism. + +Servers MAY dispatch to commands immediately once argument data +is available or delay until command data is received in full. + Capabilities ============
new file mode 100644 --- /dev/null +++ b/mercurial/wireprotoframing.py @@ -0,0 +1,156 @@ +# wireprotoframing.py - unified framing protocol for wire protocol +# +# Copyright 2018 Gregory Szorc <gregory.szorc@gmail.com> +# +# This software may be used and distributed according to the terms of the +# GNU General Public License version 2 or any later version. + +# This file contains functionality to support the unified frame-based wire +# protocol. For details about the protocol, see +# `hg help internals.wireprotocol`. + +from __future__ import absolute_import + +import struct + +from . import ( + util, +) + +FRAME_HEADER_SIZE = 4 +DEFAULT_MAX_FRAME_SIZE = 32768 + +FRAME_TYPE_COMMAND_NAME = 0x01 +FRAME_TYPE_COMMAND_ARGUMENT = 0x02 +FRAME_TYPE_COMMAND_DATA = 0x03 + +FRAME_TYPES = { + b'command-name': FRAME_TYPE_COMMAND_NAME, + b'command-argument': FRAME_TYPE_COMMAND_ARGUMENT, + b'command-data': FRAME_TYPE_COMMAND_DATA, +} + +FLAG_COMMAND_NAME_EOS = 0x01 +FLAG_COMMAND_NAME_HAVE_ARGS = 0x02 +FLAG_COMMAND_NAME_HAVE_DATA = 0x04 + +FLAGS_COMMAND = { + b'eos': FLAG_COMMAND_NAME_EOS, + b'have-args': FLAG_COMMAND_NAME_HAVE_ARGS, + b'have-data': FLAG_COMMAND_NAME_HAVE_DATA, +} + +FLAG_COMMAND_ARGUMENT_CONTINUATION = 0x01 +FLAG_COMMAND_ARGUMENT_EOA = 0x02 + +FLAGS_COMMAND_ARGUMENT = { + b'continuation': FLAG_COMMAND_ARGUMENT_CONTINUATION, + b'eoa': FLAG_COMMAND_ARGUMENT_EOA, +} + +FLAG_COMMAND_DATA_CONTINUATION = 0x01 +FLAG_COMMAND_DATA_EOS = 0x02 + +FLAGS_COMMAND_DATA = { + b'continuation': FLAG_COMMAND_DATA_CONTINUATION, + b'eos': FLAG_COMMAND_DATA_EOS, +} + +# Maps frame types to their available flags. +FRAME_TYPE_FLAGS = { + FRAME_TYPE_COMMAND_NAME: FLAGS_COMMAND, + FRAME_TYPE_COMMAND_ARGUMENT: FLAGS_COMMAND_ARGUMENT, + FRAME_TYPE_COMMAND_DATA: FLAGS_COMMAND_DATA, +} + +ARGUMENT_FRAME_HEADER = struct.Struct(r'<HH') + +def makeframe(frametype, frameflags, payload): + """Assemble a frame into a byte array.""" + # TODO assert size of payload. + frame = bytearray(FRAME_HEADER_SIZE + len(payload)) + + l = struct.pack(r'<I', len(payload)) + frame[0:3] = l[0:3] + frame[3] = (frametype << 4) | frameflags + frame[4:] = payload + + return frame + +def makeframefromhumanstring(s): + """Given a string of the form: <type> <flags> <payload>, creates a frame. + + This can be used by user-facing applications and tests for creating + frames easily without having to type out a bunch of constants. + + Frame type and flags can be specified by integer or named constant. + Flags can be delimited by `|` to bitwise OR them together. + """ + frametype, frameflags, payload = s.split(b' ', 2) + + if frametype in FRAME_TYPES: + frametype = FRAME_TYPES[frametype] + else: + frametype = int(frametype) + + finalflags = 0 + validflags = FRAME_TYPE_FLAGS[frametype] + for flag in frameflags.split(b'|'): + if flag in validflags: + finalflags |= validflags[flag] + else: + finalflags |= int(flag) + + payload = util.unescapestr(payload) + + return makeframe(frametype, finalflags, payload) + +def createcommandframes(cmd, args, datafh=None): + """Create frames necessary to transmit a request to run a command. + + This is a generator of bytearrays. Each item represents a frame + ready to be sent over the wire to a peer. + """ + flags = 0 + if args: + flags |= FLAG_COMMAND_NAME_HAVE_ARGS + if datafh: + flags |= FLAG_COMMAND_NAME_HAVE_DATA + + if not flags: + flags |= FLAG_COMMAND_NAME_EOS + + yield makeframe(FRAME_TYPE_COMMAND_NAME, flags, cmd) + + for i, k in enumerate(sorted(args)): + v = args[k] + last = i == len(args) - 1 + + # TODO handle splitting of argument values across frames. + payload = bytearray(ARGUMENT_FRAME_HEADER.size + len(k) + len(v)) + offset = 0 + ARGUMENT_FRAME_HEADER.pack_into(payload, offset, len(k), len(v)) + offset += ARGUMENT_FRAME_HEADER.size + payload[offset:offset + len(k)] = k + offset += len(k) + payload[offset:offset + len(v)] = v + + flags = FLAG_COMMAND_ARGUMENT_EOA if last else 0 + yield makeframe(FRAME_TYPE_COMMAND_ARGUMENT, flags, payload) + + if datafh: + while True: + data = datafh.read(DEFAULT_MAX_FRAME_SIZE) + + done = False + if len(data) == DEFAULT_MAX_FRAME_SIZE: + flags = FLAG_COMMAND_DATA_CONTINUATION + else: + flags = FLAG_COMMAND_DATA_EOS + assert datafh.read(1) == b'' + done = True + + yield makeframe(FRAME_TYPE_COMMAND_DATA, flags, data) + + if done: + break
--- a/mercurial/wireprotoserver.py +++ b/mercurial/wireprotoserver.py @@ -32,7 +32,7 @@ HGTYPE = 'application/mercurial-0.1' HGTYPE2 = 'application/mercurial-0.2' HGERRTYPE = 'application/hg-error' -HTTPV2TYPE = 'application/mercurial-tbd' +FRAMINGTYPE = b'application/mercurial-exp-framing-0001' HTTPV2 = wireprototypes.HTTPV2 SSHV1 = wireprototypes.SSHV1 @@ -336,21 +336,21 @@ res.setbodybytes(_('invalid wire protocol command: %s') % command) return - if req.headers.get(b'Accept') != HTTPV2TYPE: + if req.headers.get(b'Accept') != FRAMINGTYPE: res.status = b'406 Not Acceptable' res.headers[b'Content-Type'] = b'text/plain' res.setbodybytes(_('client MUST specify Accept header with value: %s\n') - % HTTPV2TYPE) + % FRAMINGTYPE) return if (b'Content-Type' in req.headers - and req.headers[b'Content-Type'] != HTTPV2TYPE): + and req.headers[b'Content-Type'] != FRAMINGTYPE): res.status = b'415 Unsupported Media Type' # TODO we should send a response with appropriate media type, # since client does Accept it. res.headers[b'Content-Type'] = b'text/plain' res.setbodybytes(_('client MUST send Content-Type header with ' - 'value: %s\n') % HTTPV2TYPE) + 'value: %s\n') % FRAMINGTYPE) return # We don't do anything meaningful yet.
--- a/tests/test-http-api-httpv2.t +++ b/tests/test-http-api-httpv2.t @@ -1,5 +1,5 @@ $ HTTPV2=exp-http-v2-0001 - $ MEDIATYPE=application/mercurial-tbd + $ MEDIATYPE=application/mercurial-exp-framing-0001 $ send() { > hg --verbose debugwireproto --peer raw http://$LOCALIP:$HGPORT/ @@ -120,9 +120,9 @@ s> Server: testing stub value\r\n s> Date: $HTTP_DATE$\r\n s> Content-Type: text/plain\r\n - s> Content-Length: 72\r\n + s> Content-Length: 85\r\n s> \r\n - s> client MUST specify Accept header with value: application/mercurial-tbd\n + s> client MUST specify Accept header with value: application/mercurial-exp-framing-0001\n Bad Accept header results in 406 @@ -143,9 +143,9 @@ s> Server: testing stub value\r\n s> Date: $HTTP_DATE$\r\n s> Content-Type: text/plain\r\n - s> Content-Length: 72\r\n + s> Content-Length: 85\r\n s> \r\n - s> client MUST specify Accept header with value: application/mercurial-tbd\n + s> client MUST specify Accept header with value: application/mercurial-exp-framing-0001\n Bad Content-Type header results in 415 @@ -158,7 +158,7 @@ using raw connection to peer s> POST /api/exp-http-v2-0001/ro/customreadonly HTTP/1.1\r\n s> Accept-Encoding: identity\r\n - s> accept: application/mercurial-tbd\r\n + s> accept: application/mercurial-exp-framing-0001\r\n s> content-type: badmedia\r\n s> user-agent: test\r\n s> host: $LOCALIP:$HGPORT\r\n (glob) @@ -168,9 +168,9 @@ s> Server: testing stub value\r\n s> Date: $HTTP_DATE$\r\n s> Content-Type: text/plain\r\n - s> Content-Length: 75\r\n + s> Content-Length: 88\r\n s> \r\n - s> client MUST send Content-Type header with value: application/mercurial-tbd\n + s> client MUST send Content-Type header with value: application/mercurial-exp-framing-0001\n Request to read-only command works out of the box @@ -179,15 +179,18 @@ > accept: $MEDIATYPE > content-type: $MEDIATYPE > user-agent: test + > frame command-name eos customreadonly > EOF using raw connection to peer s> POST /api/exp-http-v2-0001/ro/customreadonly HTTP/1.1\r\n s> Accept-Encoding: identity\r\n - s> accept: application/mercurial-tbd\r\n - s> content-type: application/mercurial-tbd\r\n + s> accept: application/mercurial-exp-framing-0001\r\n + s> content-type: application/mercurial-exp-framing-0001\r\n s> user-agent: test\r\n + s> content-length: 18\r\n s> host: $LOCALIP:$HGPORT\r\n (glob) s> \r\n + s> \x0e\x00\x00\x11customreadonly s> makefile('rb', None) s> HTTP/1.1 200 OK\r\n s> Server: testing stub value\r\n @@ -283,15 +286,18 @@ > user-agent: test > accept: $MEDIATYPE > content-type: $MEDIATYPE + > frame command-name eos customreadonly > EOF using raw connection to peer s> POST /api/exp-http-v2-0001/rw/customreadonly HTTP/1.1\r\n s> Accept-Encoding: identity\r\n - s> accept: application/mercurial-tbd\r\n - s> content-type: application/mercurial-tbd\r\n + s> accept: application/mercurial-exp-framing-0001\r\n + s> content-type: application/mercurial-exp-framing-0001\r\n s> user-agent: test\r\n + s> content-length: 18\r\n s> host: $LOCALIP:$HGPORT\r\n (glob) s> \r\n + s> \x0e\x00\x00\x11customreadonly s> makefile('rb', None) s> HTTP/1.1 200 OK\r\n s> Server: testing stub value\r\n @@ -311,7 +317,7 @@ using raw connection to peer s> POST /api/exp-http-v2-0001/rw/badcommand HTTP/1.1\r\n s> Accept-Encoding: identity\r\n - s> accept: application/mercurial-tbd\r\n + s> accept: application/mercurial-exp-framing-0001\r\n s> user-agent: test\r\n s> host: $LOCALIP:$HGPORT\r\n (glob) s> \r\n