## Copyright (C) 2012 Ben Abbott, Jonas Lundgren
##
## This file is part of Octave.
##
## Octave is free software; you can redistribute it and/or modify it
## under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 3 of the License, or (at
## your option) any later version.
##
## Octave is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
## General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with Octave; see the file COPYING.  If not, see
## <http://www.gnu.org/licenses/>.

function splineimages (nm, typ)
  graphics_toolkit ("gnuplot");
  set_print_size ();
  hide_output ();
  if (strcmp (typ, "png"))
    set (0, "defaulttextfontname", "*");
  endif
  if (strcmp (typ, "eps"))
    d_typ = "-depsc2";
  else
    d_typ = cstrcat ("-d", typ);
  endif

  if (strcmp (typ, "txt"))
    image_as_txt (nm);
  elseif (strcmp (nm, "splinefit1")) ## Breaks and Pieces
    x = 2 * pi * rand (1, 200);
    y = sin (x) + sin (2 * x) + 0.2 * randn (size (x));
    ## Uniform breaks
    breaks = linspace (0, 2 * pi, 41); ## 41 breaks, 40 pieces
    pp1 = splinefit (x, y, breaks);
    ## Breaks interpolated from data
    pp2 = splinefit (x, y, 10);  ## 11 breaks, 10 pieces
    ## Plot
    xx = linspace (0, 2 * pi, 400);
    y1 = ppval (pp1, xx);
    y2 = ppval (pp2, xx);
    plot (x, y, ".", xx, [y1; y2])
    axis tight
    ylim ([-2.5 2.5])
    legend ("data", "41 breaks, 40 pieces", "11 breaks, 10 pieces")
    print (cstrcat (nm, ".", typ), d_typ)
  elseif (strcmp (nm, "splinefit2")) ## Spline orders
    ## Data (200 points)
    x = 2 * pi * rand (1, 200);
    y = sin (x) + sin (2 * x) + 0.1 * randn (size (x));
    ## Splines
    pp1 = splinefit (x, y, 8, "order", 0);  ## Piecewise constant
    pp2 = splinefit (x, y, 8, "order", 1);  ## Piecewise linear
    pp3 = splinefit (x, y, 8, "order", 2);  ## Piecewise quadratic
    pp4 = splinefit (x, y, 8, "order", 3);  ## Piecewise cubic
    pp5 = splinefit (x, y, 8, "order", 4);  ## Etc.
    ## Plot
    xx = linspace (0, 2 * pi, 400);
    y1 = ppval (pp1, xx);
    y2 = ppval (pp2, xx);
    y3 = ppval (pp3, xx);
    y4 = ppval (pp4, xx);
    y5 = ppval (pp5, xx);
    plot (x, y, ".", xx, [y1; y2; y3; y4; y5])
    axis tight
    ylim ([-2.5 2.5])
    legend ({"data", "order 0", "order 1", "order 2", "order 3", "order 4"})
    print (cstrcat (nm, ".", typ), d_typ)
  elseif (strcmp (nm, "splinefit3"))
    ## Data (100 points)
    x = 2 * pi * [0, (rand (1, 98)), 1];
    y = sin (x) - cos (2 * x) + 0.2 * randn (size (x));
    ## No constraints
    pp1 = splinefit (x, y, 10, "order", 5);
    ## Periodic boundaries
    pp2 = splinefit (x, y, 10, "order", 5, "periodic", true);
    ## Plot
    xx = linspace (0, 2 * pi, 400);
    y1 = ppval (pp1, xx);
    y2 = ppval (pp2, xx);
    plot (x, y, ".", xx, [y1; y2])
    axis tight
    ylim ([-2 3])
    legend ({"data", "no constraints", "periodic"})
    print (cstrcat (nm, ".", typ), d_typ)
  elseif (strcmp (nm, "splinefit4"))
    ## Data (200 points)
    x = 2 * pi * rand (1, 200);
    y = sin (2 * x) + 0.1 * randn (size (x));
    ## Breaks
    breaks = linspace (0, 2 * pi, 10);
    ## Clamped endpoints, y = y" = 0
    xc = [0, 0, 2*pi, 2*pi];
    cc = [(eye (2)), (eye (2))];
    con = struct ("xc", xc, "cc", cc);
    pp1 = splinefit (x, y, breaks, "constraints", con);
    ## Hinged periodic endpoints, y = 0
    con = struct ("xc", 0);
    pp2 = splinefit (x, y, breaks, "constraints", con, "periodic", true);
    ## Plot
    xx = linspace (0, 2 * pi, 400);
    y1 = ppval (pp1, xx);
    y2 = ppval (pp2, xx);
    plot (x, y, ".", xx, [y1; y2])
    axis tight
    ylim ([-1.5 1.5])
    legend({"data", "clamped", "hinged periodic"})
    print (cstrcat (nm, ".", typ), d_typ)
  elseif (strcmp (nm, "splinefit5"))
    ## Truncated data
    x = [0,  1,  2,  4,  8, 16, 24, 40, 56, 72, 80] / 80;
    y = [0, 28, 39, 53, 70, 86, 90, 79, 55, 22,  2] / 1000;
    xy = [x; y];
    ## Curve length parameter
    ds = sqrt (diff (x).^2 + diff (y).^2);
    s = [0, cumsum(ds)];
    ## Constraints at s = 0: (x,y) = (0,0), (dx/ds,dy/ds) = (0,1)
    con = struct ("xc", [0 0], "yc", [0 0; 0 1], "cc", eye (2));
    ## Fit a spline with 4 pieces
    pp = splinefit (s, xy, 4, "constraints", con);
    ## Plot
    ss = linspace (0, s(end), 400);
    xyfit = ppval (pp, ss);
    xyb = ppval(pp, pp.breaks);
    plot (x, y, ".", xyfit(1,:), xyfit(2,:), "r", xyb(1,:), xyb(2,:), "ro")
    legend ({"data", "spline", "breaks"})
    axis tight
    ylim ([0 0.1])
    print (cstrcat (nm, ".", typ), d_typ)
  elseif (strcmp (nm, "splinefit6"))
    ## Data
    x = linspace (0, 2*pi, 200);
    y = sin (x) + sin (2 * x) + 0.05 * randn (size (x));
    ## Add outliers
    x = [x, linspace(0,2*pi,60)];
    y = [y, -ones(1,60)];
    ## Fit splines with hinged conditions
    con = struct ("xc", [0, 2*pi]);
    pp1 = splinefit (x, y, 8, "constraints", con, "beta", 0.25); ## Robust fitting
    pp2 = splinefit (x, y, 8, "constraints", con, "beta", 0.75); ## Robust fitting
    pp3 = splinefit (x, y, 8, "constraints", con); ## No robust fitting
    ## Plot
    xx = linspace (0, 2*pi, 400);
    y1 = ppval (pp1, xx);
    y2 = ppval (pp2, xx);
    y3 = ppval (pp3, xx);
    plot (x, y, ".", xx, [y1; y2; y3])
    legend({"data with outliers","robust, beta = 0.25", ...
            "robust, beta = 0.75", "no robust fitting"})
    axis tight
    ylim ([-2 2])
    print (cstrcat (nm, ".", typ), d_typ)
  endif
  hide_output ();  
endfunction

function set_print_size ()
  image_size = [5.0, 3.5]; # in inches, 16:9 format
  border = 0;              # For postscript use 50/72
  set (0, "defaultfigurepapertype", "<custom>");
  set (0, "defaultfigurepaperorientation", "landscape");
  set (0, "defaultfigurepapersize", image_size + 2*border);
  set (0, "defaultfigurepaperposition", [border, border, image_size]);
endfunction

## Use this function before plotting commands and after every call to
## print since print() resets output to stdout (unfortunately, gnpulot
## can't pop output as it can the terminal type).
function hide_output ()
  f = figure (1);
  set (f, "visible", "off");
endfunction

## generate something for the texinfo @image command to process
function image_as_txt(nm)
  fid = fopen (sprintf ("%s.txt", nm), "wt");
  fputs (fid, "\n");
  fputs (fid, "+---------------------------------+\n");
  fputs (fid, "| Image unavailable in text mode. |\n");
  fputs (fid, "+---------------------------------+\n");
  fclose (fid);
endfunction

%!demo
%! for s = 1:6
%!   splineimages (sprintf ("splinefit##d", s), "pdf")
%! endfor