Mercurial > hg > octave-nkf
changeset 5134:0309b6722ee9
[project @ 2005-02-08 20:17:55 by jwe]
author | jwe |
---|---|
date | Tue, 08 Feb 2005 20:17:55 +0000 |
parents | 7191f6e086f9 |
children | 8eaef366ab43 |
files | doc/ChangeLog doc/interpreter/plot.txi |
diffstat | 2 files changed, 176 insertions(+), 162 deletions(-) [+] |
line wrap: on
line diff
--- a/doc/ChangeLog +++ b/doc/ChangeLog @@ -1,3 +1,8 @@ +2005-02-08 Quentin Spencer <qspencer@ieee.org> + + * interpreter/plot.txi: Emphasize compatible plotting functions + over gplot and friends. + 2004-02-13 John W. Eaton <jwe@bevo.che.wisc.edu> * liboctave/Makefile.in (FORMATTED): Use liboctave*.html instead
--- a/doc/interpreter/plot.txi +++ b/doc/interpreter/plot.txi @@ -6,13 +6,17 @@ @chapter Plotting All of Octave's plotting functions use @code{gnuplot} to handle the -actual graphics. There are two low-level functions, @code{gplot} and +actual graphics. Most types of plots can be generated using the basic +plotting functions, which are patterned after the equivalent functions +in @sc{Matlab}. The use of these functions is generally +straightforward, and is the preferred method for generating plots. +However, for users familiar with @code{gnuplot}, or for some +specialized applications where the basic commands are inadequate, +Octave also provides two low-level functions, @code{gplot} and @code{gsplot}, that behave almost exactly like the corresponding -@code{gnuplot} functions @code{plot} and @code{splot}. A number of -other higher level plotting functions, patterned after the graphics -functions found in @sc{Matlab} version 3.5, are also available. -These higher level functions are all implemented in terms of the two -low-level plotting functions. +@code{gnuplot} functions @code{plot} and @code{splot}. Also note that +some advanced @sc{Matlab} features from recent versions are not +implemented, such as handle-graphics and related functions. @menu * Two-Dimensional Plotting:: @@ -21,12 +25,113 @@ * Plot Annotations:: * Multiple Plots on One Page:: * Multiple Plot Windows:: +@c *Exporting Plots:: +* Low-Level plotting commands:: * Interaction with gnuplot:: @end menu @node Two-Dimensional Plotting @section Two-Dimensional Plotting +The @sc{Matlab}-style two-dimensional plotting commands are: + +@cindex plotting +@cindex graphics + +@DOCSTRING(plot) + +@DOCSTRING(hold) + +@DOCSTRING(ishold) + +@DOCSTRING(clearplot) + +@DOCSTRING(shg) + +@DOCSTRING(closeplot) + +@DOCSTRING(purge_tmp_files) + +@DOCSTRING(axis) + +@node Specialized Two-Dimensional Plots +@section Specialized Two-Dimensional Plots + +@DOCSTRING(bar) + +@DOCSTRING(contour) + +@DOCSTRING(hist) + +@DOCSTRING(loglog) + +@DOCSTRING(polar) + +@DOCSTRING(semilogx) + +@DOCSTRING(semilogy) + +@DOCSTRING(stairs) + +@DOCSTRING(errorbar) + +@DOCSTRING(loglogerr) + +@DOCSTRING(semilogxerr) + +@DOCSTRING(semilogyerr) + +@node Three-Dimensional Plotting +@section Three-Dimensional Plotting + +The @sc{Matlab}-style three-dimensional plotting commands are: + +@DOCSTRING(mesh) + +@DOCSTRING(meshgrid) + +@DOCSTRING(meshdom) + +@node Plot Annotations +@section Plot Annotations + +@DOCSTRING(grid) + +@DOCSTRING(title) + +@DOCSTRING(xlabel) + +@DOCSTRING(top_title) + +@node Multiple Plots on One Page +@section Multiple Plots on One Page + +The following functions all require a version of @code{gnuplot} that +supports the multiplot feature. + +@DOCSTRING(mplot) + +@DOCSTRING(multiplot) + +@DOCSTRING(oneplot) + +@DOCSTRING(plot_border) + +@DOCSTRING(subplot) + +@DOCSTRING(subwindow) + +@node Multiple Plot Windows +@section Multiple Plot Windows + +@DOCSTRING(figure) + +@c @node Exporting Plots +@c XXX FIXME XXX -- add info about getting paper copies of plots. + +@node Low-Level plotting commands +@section Low-Level plotting commands + @deffn {Command} gplot @var{ranges} @var{expression} @var{using} @var{title} @var{style} Generate a 2-dimensional plot. @@ -104,128 +209,6 @@ the border of the plot. @end deffn -@deffn {Command} gset options -@deffnx {Command} gshow options -@deffnx {Command} replot options -In addition to the basic plotting commands, the whole range of -@code{gset} and @code{gshow} commands from @code{gnuplot} are available, -as is @code{replot}. - -@findex set -@findex show -Note that in Octave 2.0, the @code{set} and @code{show} commands were -renamed to @code{gset} and @code{gshow} in order to allow for -compatibility with the @sc{Matlab} graphics and GUI commands in a future -version of Octave. (For now, the old @code{set} and @code{show} -commands do work, but they print an annoying warning message to try to -get people to switch to using @code{gset} and @code{gshow}.) - -The @code{gset} and @code{gshow} commands allow you to set and show -@code{gnuplot} parameters. For more information about the @code{gset} -and @code{gshow} commands, see the documentation for @code{set} and -@code{show} in the @code{gnuplot} user's guide (also available on line -if you run @code{gnuplot} directly, instead of running it from Octave). - -The @code{replot} command allows you to force the plot to be -redisplayed. This is useful if you have changed something about the -plot, such as the title or axis labels. The @code{replot} command also -accepts the same arguments as @code{gplot} or @code{gsplot} (except for -data ranges) so you can add additional lines to existing plots. - -For example, - -@example -gset term tek40 -gset output "/dev/plotter" -gset title "sine with lines and cosine with impulses" -replot "sin (x) w l" -@end example - -will change the terminal type for plotting, add a title to the current -plot, add a graph of -@iftex -@tex -$\sin(x)$ -@end tex -@end iftex -@ifinfo -sin (x) -@end ifinfo -to the plot, and force the new plot to be -sent to the plot device. This last step is normally required in order -to update the plot. This default is reasonable for slow terminals or -hardcopy output devices because even when you are adding additional -lines with a replot command, gnuplot always redraws the entire plot, and -you probably don't want to have a completely new plot generated every -time something as minor as an axis label changes. - -@findex shg -The command @code{shg} is equivalent to executing @code{replot} without -any arguments. -@end deffn - -@DOCSTRING(automatic_replot) - -Note that NaN values in the plot data are automatically omitted, and -Inf values are converted to a very large value before calling gnuplot. - -@c XXX FIXME XXX -- add info about what to do to get plots on remote X -@c terminals. People often forget how to properly set DISPLAY and run -@c xhost. - -@c XXX FIXME XXX -- add info about getting paper copies of plots. - -The @sc{Matlab}-style two-dimensional plotting commands are: - -@cindex plotting -@cindex graphics - -@DOCSTRING(plot) - -@DOCSTRING(hold) - -@DOCSTRING(ishold) - -@DOCSTRING(clearplot) - -@DOCSTRING(shg) - -@DOCSTRING(closeplot) - -@DOCSTRING(purge_tmp_files) - -@DOCSTRING(axis) - -@node Specialized Two-Dimensional Plots -@section Specialized Two-Dimensional Plots - -@DOCSTRING(bar) - -@DOCSTRING(contour) - -@DOCSTRING(hist) - -@DOCSTRING(loglog) - -@DOCSTRING(polar) - -@DOCSTRING(semilogx) - -@DOCSTRING(semilogy) - -@DOCSTRING(stairs) - -@DOCSTRING(errorbar) - -@DOCSTRING(loglogerr) - -@DOCSTRING(semilogxerr) - -@DOCSTRING(semilogyerr) - -@node Three-Dimensional Plotting -@section Three-Dimensional Plotting - @deffn {Command} gsplot @var{ranges} @var{expression} @var{using} @var{title} @var{style} Generate a 3-dimensional plot. @@ -298,49 +281,75 @@ but not @code{rand (5, 30)}. @end deffn -The @sc{Matlab}-style three-dimensional plotting commands are: - -@DOCSTRING(mesh) - -@DOCSTRING(meshgrid) - -@DOCSTRING(meshdom) - -@node Plot Annotations -@section Plot Annotations +@deffn {Command} gset options +@deffnx {Command} gshow options +@deffnx {Command} replot options +In addition to the basic plotting commands, the whole range of +@code{gset} and @code{gshow} commands from @code{gnuplot} are available, +as is @code{replot}. -@DOCSTRING(grid) - -@DOCSTRING(title) +@findex set +@findex show +Note that in Octave 2.0, the @code{set} and @code{show} commands were +renamed to @code{gset} and @code{gshow} in order to allow for +compatibility with the @sc{Matlab} graphics and GUI commands in a future +version of Octave. (For now, the old @code{set} and @code{show} +commands do work, but they print an annoying warning message to try to +get people to switch to using @code{gset} and @code{gshow}.) -@DOCSTRING(bottom_title) +The @code{gset} and @code{gshow} commands allow you to set and show +@code{gnuplot} parameters. For more information about the @code{gset} +and @code{gshow} commands, see the documentation for @code{set} and +@code{show} in the @code{gnuplot} user's guide (also available on line +if you run @code{gnuplot} directly, instead of running it from Octave). -@DOCSTRING(xlabel) +The @code{replot} command allows you to force the plot to be +redisplayed. This is useful if you have changed something about the +plot, such as the title or axis labels. The @code{replot} command also +accepts the same arguments as @code{gplot} or @code{gsplot} (except for +data ranges) so you can add additional lines to existing plots. -@node Multiple Plots on One Page -@section Multiple Plots on One Page +For example, -The following functions all require a version of @code{gnuplot} that -supports the multiplot feature. - -@DOCSTRING(mplot) - -@DOCSTRING(multiplot) - -@DOCSTRING(oneplot) - -@DOCSTRING(plot_border) +@example +gset term tek40 +gset output "/dev/plotter" +gset title "sine with lines and cosine with impulses" +replot "sin (x) w l" +@end example -@DOCSTRING(subplot) - -@DOCSTRING(subwindow) +will change the terminal type for plotting, add a title to the current +plot, add a graph of +@iftex +@tex +$\sin(x)$ +@end tex +@end iftex +@ifinfo +sin (x) +@end ifinfo +to the plot, and force the new plot to be +sent to the plot device. This last step is normally required in order +to update the plot. This default is reasonable for slow terminals or +hardcopy output devices because even when you are adding additional +lines with a replot command, gnuplot always redraws the entire plot, and +you probably don't want to have a completely new plot generated every +time something as minor as an axis label changes. -@DOCSTRING(top_title) +@findex shg +The command @code{shg} is equivalent to executing @code{replot} without +any arguments. +@end deffn + +@DOCSTRING(automatic_replot) -@node Multiple Plot Windows -@section Multiple Plot Windows +Note that NaN values in the plot data are automatically omitted, and +Inf values are converted to a very large value before calling gnuplot. -@DOCSTRING(figure) +@c XXX FIXME XXX -- add info about what to do to get plots on remote X +@c terminals. People often forget how to properly set DISPLAY and run +@c xhost. + @node Interaction with gnuplot @section Interaction with @code{gnuplot}