Mercurial > hg > octave-nkf
changeset 4400:54a8705b0463
[project @ 2003-05-01 16:31:01 by jwe]
author | jwe |
---|---|
date | Thu, 01 May 2003 16:31:01 +0000 |
parents | 286a3345aa8e |
children | 018fb50a84e9 |
files | README.Windows |
diffstat | 1 files changed, 216 insertions(+), 122 deletions(-) [+] |
line wrap: on
line diff
--- a/README.Windows +++ b/README.Windows @@ -1,150 +1,244 @@ -*** PLEASE NOTE: This information is mostly out of date. It would be -*** useful for someone who uses Octave on Windows to take over -*** mainenance of this and other files related to running Octave on -*** Windows systems. +The following is my current best set of directions for building Octave +from sources on a Windows system using the Cygwin tools. If you +already have Cygwin installed, you may need to update your +installation of tools to include those mentioned below. + +Following these steps should give you an Octave installation that +includes all the necessary tools for building dynamically linked +functions (.oct files). -Octave has been ported to Windows NT and Windows 95 using the gnu-win32 -tools from Cygnus Support. If you would like to volunteer to work on -improving this port, please contact bug-octave@bevo.che.wisc.edu. + 1. Use your favorite browser to view the page http://www.cygwin.com + + 2. Click on the "Install or update now" link. + + 3. A dialog should appear with the option to run the setup program + from its current location or save it to disk. Either will work, + but I usually choose to save the setup program to disk so that it + is possible to run it later to update the installation without + having to go back to the web page using a browser. + + 4. Run the setup program. + + 5. Choose "Install from Internet". + + 6. Select a root install directory. You may choose any directory, but + it needs to have about 600MB available to install all the + necessary Cygwin tools plus build and install Octave from sources. + That may seem like a large disk space requirement, but remember + that you are getting more than just Octave, you are installing a + Unix-like development environment including C, C++, and Fortran + compilers as well. Once Octave is installed, you can delete the + sources and build directory, freeing up about 250MB. -The directory ftp://ftp.che.wisc.edu/pub/octave/BINARIES/gnu-win32 -contains a binary distribution of Octave for Windows NT/95 along with -installation instructions. Unless you are interested in doing some -hacking, you should use the binary releases. + You may choose to install for just you or all users (if you have + permission to do so). I would select "Unix" as the default text + file type (this option should be the default). + + 7. Select a local package directory. This is a directory that the + setup program will use to temporarily store package files before + installing them. It should have plenty of space (probably 70MB + or more). You may delete this directory once the installation is + complete. + + 8. Select your Internet Connection. Probably "Direct Connection" is + OK unless you are behind a firewall of some kind that limits your + access to the Internet. + + 9. Choose a download site. One that is "near" you on the net is + probably best. + +10. Select packages. The defaults are not enough to build all of + Octave from sources. In addition to the default set of packages, + you should select the following packages from the following + categories: + + Archive: unzip + Devel: autoconf, binutils, bison, cvs, dejagnu, flex, gcc, + gperf, make + Text: less, tetex, tetex-base + Utils: diff, patch -Here is a list of current problems (and workarounds, where available). + Once you have made these selections, click the Next button to + download and install all the selected packages. The download and + install may take a while depending on the speed of your computer + and your connection to the net. + +11. Once the download and file installation is done, click Finish. I + usually choose to create an icon on the desktop and put an icon in + the start menu. After you click finish, a series of scripts will + run, displaying some output in a terminal window. It will take a + few minutes. -* To compile and install Octave on a Windows NT/95 system, - you will need to get the beta 19 release of the gnu-win32 tools. - They are available from ftp://ftp.cygnus.com/pub/gnu-win32. +12. Download and install Gnuplot: + + a. Use your favorite browser to go to http://www.gnuplot.info and + download a binary package of gnuplot for Windows. At the time + of this writing, it was available from the gnuplot ftp site in + the file gp373w32.zip. + + b. When you download the zip file, place it in your Cygwin /tmp + directory. This directory will be called something like + c:\cygwin\tmp in Windows (the precise location depends on where + you chose to install Cygwin). -* You will need to have f2c and libf2c.a or g77 installed. I would - recommend using g77. Mumit Khan has directions for building g77 at - http://www.xraylith.wisc.edu/~khan/software/gnu-win32/g77.html. - Another solution is to use egcs, which includes g77. The egcs - compiler is available from http://www.cygnus.com/egcs. + c. After downloading the zip file, start Cygwin (actually a bash + shell running in a terminal window) by clicking on the Cygwin + desktop icon or use the start menu item that you created when + you installed Cygwin. + + d. Run the command + + unzip /tmp/gp373w32.zip + + to unpack the zip archive. This command should create a + subdirectory called gp373w32 in your Cygwin home directory. + + e. Move the gnuplot programs and help file to the Cygwin bin + directory: + + mv gp373w32/pgnuplot.exe /usr/local/bin + mv gp373w32/wgnupl32.exe /usr/local/bin + mv gp373w32/WGNUPLOT.HLP /usr/local/bin + + Make sure that executable files have execute permissions set: + + chmod a+rx /usr/local/bin/pgnuplot.exe + chmod a+rx /usr/local/bin/wgnupl32.exe + + f. Test it by typing the command + + wgnupl32 -* You will also need a termcap library. The GNU termcap library seems - to work. You can get it from any GNU archive site, including - ftp://ftp.gnu.org/pub/gnu/termcap-1.3.tar.gz. + This command should bring up a gnuplot command window. Try + plotting something by typing + + sin(x) + + at the gnuplot prompt. This command should bring up a plot + window displaying a sine wave. + + g. close gnuplot and start the Octave installation. + +13. Get the Octave sources, either from a current snapshot + distribution or from CVS: + + Snapshot: + + a. Download a copy of the current version of Octave from + ftp://ftp.octave.org. You may use the command line ftp + client in Cygwin or a web browser. You are looking for the + most recent version in the pub/octave/bleeding-edge + directory. At the time of this writing, it was + octave-2.1.46.tar.gz. Save this file to your Cygwin home + directory. This directory will usually be called something + like c:\cygwin\home\jwe from Windows (the precise location + depends on where you chose to install Cygwin). -* It is possible to cross-compile Octave for Windows NT/95 systems. - On the same hardware, it's generally much faster to use gcc as a - cross compiler under Linux than as a native compiler under Windows. + IMPORTANT: If you use the ftp client, be sure to set the + binary mode for downloads by typing + + binary + + at the ftp prompt. + + b. Unpack the source files using the command: + + tar zxf octave-2.1.46.tar.gz + + in the Cygwin shell. This command will create a subdirectory + called octave-2.1.46 in your home directory. + + c. Change your current working directory to the top-level Octave + source directory: + + cd octave-2.1.46 + + then continue with step 14 below. + + CVS: + + a. Check out a copy of the current sources from the public CVS + archive by running the following commands - Here are some instructions for building a cross version of gcc and - then using it to compile Octave. I've done this using a Linux - system as the host, but it should work equally well on other systems - that can run gcc). + cvs -d :pserver:anoncvs@www.octave.org:/cvs login + cvs -z 9 -d :pserver:anoncvs@www.octave.org:/cvs checkout octave + + in the Cygwin shell. The first command will prompt you for a + password; reply with anoncvs. The checkout command will + create a subdirectory called octave containing the current + CVS version of the Octave sources. + + b. Change your current working directory to the top-level Octave + source directory: - + install cdk on your Windows system + cd octave + + c. Build the configure scripts by running the command + + ./autogen.sh + + then continue with step 14 below. + + +14. Configure Octave by running the command + + ./configure --enable-shared --disable-static - + build a cross version of binutils: + This command will take several minutes to run as the configure + script determines what features are available on your system. You + need the --enable-shared option if you want to build dynamically + loaded functions (.oct files) later. You may omit the + --disable-static option if you want to build static libraries (.a + files) in addition to shared libraries, but the build will take + about twice as long to complete. + +15. Build the Octave binary by running the command + + make - tar zxf binutils-2.9.tar.gz - cd binutils-2.9 - ./configure --target=i386-pc-cygwin32 --prefix=/usr/local/cross-gcc - make + You may see warnings from gcc saying that __cdecl is redefined or + that all code is position independent. You may safely ignore + these warnings. + +16. (OPTIONAL) Run Octave's regression test suite by running the + command + + make check + + Running the tests may take a very long time, so if you are in a + hurry, you might want to skip this step. At the time of this + writing, there are 4 "expected" failures related to the try-catch + and eval commands. You may safely ignore those failures. + +17. Complete the installation by running the command + make install - (You can choose whatever value for prefix that you prefer, of - course, just remember to also make the corresponding changes in the - following steps as well.) - - + copy libraries and include files from cdk. You'll need the - library files from the following directory trees: - - b19/H-i386-pc-cygwin32/lib - b19/H-i386-pc-cygwin32/i386-cygwin32/lib +18. Try starting Octave by running the command - Copy them to /usr/local/cross-gcc/i386-pc-cygwin32/lib. - - You'll also need the include files from the following directory - trees: - - b19/include - b19/H-i386-pc-cygwin32/include - - Copy them to /usr/local/cross-gcc/i386-pc-cygwin32/include. + octave - + build cross version of egcs: - - tar zxf egcs-1.0.2.tar.gz - cd egcs-1.0.2 - export PATH=/usr/local/cross-gcc/bin:$PATH - ./configure --target=i386-pc-cygwin32 --prefix=/usr/local/cross-gcc - make - make install + in the cygwin shell and then typing - + cross-compile libtermcap: - - export PATH=/usr/local/cross-gcc/i386-pc-cygwin32/bin:$PATH - tar zxf termcap-1.3.tar.gz - cd termcap-1.3 - ./configure --host=i386-pc-cygwin3 - make - cp termcap.h /usr/local/cross-gcc/i386-pc-cygwin32/include - cp libtermcap.a /usr/local/cross-gcc/i386-pc-cygwin32/lib - - + cross-compile Octave using the compiler you just built: + sombrero (41) - export PATH=/usr/local/cross-gcc/i386-pc-cygwin32/bin:$PATH - tar zxf octave-2.0.12.tar.gz - cd octave-2.0.10 - ./configure --host=i386-pc-cygwin3 - make - - + make a binary distribution to copy to your Windows system: - - make -f octMakefile binary-dist + at the Octave prompt to see if you can create a plot. - + copy the binary distribution to your Windows system and install - using the intall-octave shell script - -* Octave requires gnuplot for plotting, but the normal Windows version - of gnuplot will not work because it only reads from the GUI and refuses - to read input from stdin. Mumit Khan has written a patch that fixes - the problem, but the gnuplot license does not allow us to distribute - modified versions of gnuplot in binary form. The patch is available - from http://www.xraylith.wisc.edu/~khan/software/gnu-win32. +19. Try to build a .oct file and run it: -* If Octave takes a long time to find function files, you may have to - modify your LOADPATH to avoid device names specified using the - `//DEV/subdir' syntax. To map the D: drive (for example) to - /D_DRIVE, do the following: - - cd / - mkdir /D_DRIVE - mount d: /D_DRIVE - - Then you can set your LOADPATH to include /D_DRIVE/subdir instead of - //d/subdir. - -* If you see error messages like the following: - - The heap has been split, CYGWIN can't fork this process. Increase - the heap_chunk_size in the registry and try again. - - you can increase the heap size by saving the follwoing text to a - file (delete the leading white space) and then double click on the - file. Try changing the value to something larger than 4 (MB). - - REGEDIT4 - - [HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0] - "heap_chunk_in_mb"=dword:00000004 + cd examples + mkoctfile hello.cc + octave + ... + octave:1> hello + Hello, world! -If you know of solutions for any of the problems mentioned above, -please contact bug-octave@bevo.che.wisc.edu. - -More information about the gnu-win32 project is available via the WWW -at http://www.cygnus.com/gnu-win32. John W. Eaton jwe@bevo.che.wisc.edu University of Wisconsin-Madison Department of Chemical Engineering -Thu Apr 16 23:39:13 1998 +Wed Apr 30 17:15:32 2003